Differences

This shows you the differences between two versions of the page.

--- en:toolbar [2025/11/21 08:29] – benjamin
+++ en:toolbar [2025/11/23 20:05] (current) – benjamin
@@ Line 2: / Line 2: @@
 Pages showing measurements of any status or measurement comparisons always have toolbar on top with different controls and/or actions regarding to the current status.
+<alert dark>{{screenshots:buttons:help.png?71 }}
-<alert dark>{{screenshots:buttons:help.png }} Will open this wiki.
+Will open this wiki.
 </alert>
+<alert dark>{{screenshots:buttons:connect-disconnected.png?71 }}
-<alert dark>{{screenshots:buttons:connect-disconnected.png }} Connect your BLE laser device.
+Connect your BLE laser device.
-<br><br><br><br><br>
+<br><br><br>
-{{screenshots:buttons:connect-connected.png }} Laser is connected.
+{{screenshots:buttons:connect-connected.png?71 }}
+Laser is connected.
 </alert>
+<alert dark>{{screenshots:buttons:full-reset.png?71 }}
-<alert dark>{{screenshots:buttons:full-reset.png }} To reset all readings in the current measurement.<br>
+To reset all readings in the current measurement.<br>
 This button can also be found besides the title of every group. There you can delete readings for only one group.
 </alert>
+<alert dark>{{screenshots:buttons:reset-loops.png?71 }}
-<alert dark>{{screenshots:buttons:reset-loops.png }} Reset changed loops in simulation/result.
+Reset changed loops in simulation/result.
 </alert>
+<alert dark>{{screenshots:buttons:print.png?71 }}
-<alert dark>{{screenshots:buttons:print.png }} Print current measurement/comparison. <br>
+Print current measurement/comparison. <br>
 In the print dialog you can then either export as PDF or actually print it.
 </alert>
+<alert dark>{{screenshots:buttons:save.png?71 }}
-<alert dark>{{screenshots:buttons:save.png }} During measurement, all readings are sent and saved to the server. <br>
+During measurement, all readings are sent and saved to the server. <br>
 When editing a draft, all comments, loops and further settings are sent and saved to the server.
 </alert>
+<alert dark>{{screenshots:buttons:edit.png?71 }}
-<alert dark>{{screenshots:buttons:edit.png }} During measurement, change measurement presets.<br>
+During measurement, change measurement presets.<br>
 During simulation you can update preselected loops here.
 </alert>
+<alert dark>{{screenshots:buttons:settings.png?71 }}
-<alert dark>{{screenshots:buttons:settings.png }} During simulation, change tolerance and offset. The offset will be saved as you finish the measurement, so that the result is easier to read later on.
+During simulation, change tolerance and offset. The offset will be saved as you finish the measurement, so that the result is easier to read later on.
 </alert>
+<alert dark>{{screenshots:buttons:draft.png?71 }}
-<alert dark>{{screenshots:buttons:draft.png }} To create a new draft from a measurement in simulation. The link can then be shared and updated by other users.
+To create a new draft from a measurement in simulation. The link can then be shared and updated by other users.
 </alert>
+<alert dark>{{screenshots:buttons:share-link.png?71 }}
-<alert dark>{{screenshots:buttons:share-link.png }} To share a finished measurement or measurement in simulation.<br>
+To share a finished measurement or measurement in simulation.<br>
 During comparison, share the comparison.<br>
-These links are accessible for everybody except comments, which are only visible to other users if you enabled it.
+<br>
+These links are accessible to everyone in possession of them. Comments, however, are only visible to logged-in users and only if enabled.
 </alert>
+<alert dark>{{screenshots:buttons:start-enabled.png?115 }}
-<alert dark>{{screenshots:buttons:start-enabled.png }} Once the laser is connected, you can start measurement mode here.
+Once the laser is connected, you can start measurement mode here.
-<br><br><br><br><br>
+<br><br><br>
-{{screenshots:buttons:start-disabled.png }} If no empty readings are left, the button is disabled.
+{{screenshots:buttons:start-disabled.png?115 }}
+If no empty readings are left (the measurement is complete), the button is disabled.
 </alert>
+<alert dark>{{screenshots:buttons:import-xlsx-neutral.png?71 }}
-<alert dark>{{screenshots:buttons:import-xlsx-neutral.png }} Import measurement from XLSX.
+Import measurement from XLSX.
-<br><br><br><br>
+<br><br><br>
-{{screenshots:buttons:import-xlsx-warn.png }} In case you added manual values, the orange color is the hint to import data from XLSX instead of typing one by one.
+{{screenshots:buttons:import-xlsx-warn.png?71 }}
+In case you added manual values, the orange color is the hint to import data from XLSX instead of typing one by one.
 </alert>
-<alert dark>{{screenshots:buttons:next-enabled-good.png }} If no empty readings are left and the data seems plausable, the button is **green**.
+<alert dark>{{screenshots:buttons:next-enabled-good.png?71 }}
-<br><br><br><br><br>
+If no empty readings are left and the data seems plausable, the button is **green**.
-{{screenshots:buttons:next-enabled-neutral.png }} If data is complete, but does contain outliers.
+<br><br><br>
+{{screenshots:buttons:next-enabled-neutral.png?71 }}
+If data is complete, but does contain outliers.
 </alert>
+<alert dark>{{screenshots:buttons:export-xlsx.png?71 }}
-<alert dark>{{screenshots:buttons:export-xlsx.png }} To export readings from simulation/Result.
+To export readings from simulation/Result.
 </alert>
+<alert dark>{{screenshots:buttons:comparison-start.png?71 }}
-<alert dark>{{screenshots:buttons:comparison-start.png }} To start comparing one result with another.
+To start comparing one result with another.
-<br><br><br><br>
+<br><br><br>
-{{screenshots:buttons:comparison-active.png }} The {{icons:delete.svg?20x20}} will cancel comparison and return to the last result.
+{{screenshots:buttons:comparison-active.png?146 }}
+The {{icons:delete.svg?20x20}} will cancel comparison and return to the result designated as "After".
 </alert>
+<alert dark>{{screenshots:buttons:aoi-symmetry-toggle.png?146 }}
-<alert dark>{{screenshots:buttons:aoi-symmetry-toggle.png }} Switch between [[angle-of-incidence-view|AoI view]] and [[symmetry-view|symmetry view]] in simulation and result.
+Switch between [[angle-of-incidence-view|AoI view]] and [[symmetry-view|symmetry view]] in simulation and result.
 </alert>