====== Measurement settings ======

With the {{icons:lightbulb.svg?20x20}} ­button you can avoid having to push the button on your laser twice in order to get a value. This will automatically switch the laser on after each reading.

Make sure that you do not point the laser at people.

When ­ is switched on, the application will automatically discard values that are considered implausible (away from the expected value by more than 4x of the manufacturer's tolerance).

Measuring is by default started on the innermost A line on the left side of your wing. From there the whole A-row is measured towards wingtip before continuing with the left innermost B line etc. Once the left side is completed, we start again from the innermost A-line on the right side of the wing.

You can change the measurement order in the settings ­. (Note: this button is only visible, when in stop mode).

What means left and right?
Left and right are defined according to the wing's in-flight direction. This means that your left riser in flight will also be the left riser during measurement. In the wing view, the left side of the screen corresponds to the left side of the wing in flight. (Imagine, you're watching the wing from the upper surface).